How to Flash Gionee S6 Pro, S8 or S9



Recommended: What other people read after this.
Continue reading


Earlier on when Gionee S6 Pro, S8 or S9 was released we published a post to show our readers the features, specifications and price of this most adorable Gionee device called S6 Pro, S8 or S9. As well as how you can perform a hard or soft reset when your S6 Pro, S8 or S9 becomes unresponsive or should you choose to give to someone else with no data in it.

 

Usually, a hard or soft reset with the guide provided for Gionee S6 Pro, S8 or S9 is supposed to fix any possible software issue you might be experiencing with your Gionee S6 Pro, S8 or S9 or other similar android devices that the quick fixing guide for issues like camera, Bluetooth, SIM, Wi-Fi, YouTube or other malfunction could solve. But if you have tried that already and it failed then, you should probably opt-in for formatting in this case I will show you how to use SP Flash Tool to format your S6 Pro, S8 or S9.

 

Steps on how to flash Gionee S6 Pro, S8 or S9 with SP Flash Tool:

·         Download the stock ROM of Gionee S6 Pro, S8 or S9.

·         As usual you need to place your phone on charge till it is charged not less than 50 percent before you process else you phone might not wake up even after formatting.

·         Next you will have to follow the instruction of using a Smart Phone Flash Tool as explained here.

 

Stock Firmware

·         Stock Firmware flashing can be applied to Unbrick your Gionee S6 Pro, S8 or S9

·         Stock ROM flashing can be applied to fix Bootloop issues.

·         Stock Firmware flashing can be applied to either upgrade or downgrade your Gionee S6 Pro, S8 or S9

·         It can be applied to unroot or fix bugs on your Gionee S6 Pro, S8 or S9.

·         To fix stutter or lag on your Gionee S6 Pro, S8 or S9

·         Stock firmware flashing is effective in solving software issues of Gionee S6 Pro, S8 or S9.

·         Stock firmware flashing can be applied to revert back to the stock of your Gionee S6 Pro, S8 or S9 to gain your warranty.

 

Tips to Remember:

i.                     This update is meant for Gionee S6 Pro, S8 or S9 users only.

ii.                   Be sure to try the other method of installing stock firmware if yours have unlocked Bootloader issue.

iii.                 TWRP Recovery is a good alternative on how to upgrade your device if you don't want to do it the normal way. Here is a post on TWRP Recovery.

iv.                 THEUPSPOT is in no way responsible for any damage you might have on your Gionee S6 Pro, S8 or S9 while installing the update.

v.                   The usual upgrade steps require the use of PC or Laptop to carry out the firmware flashing.

vi.                 Ensure that you have an updated and working USB drivers installed.

vii.                Finally, just before your go on with the upgrade or downgrade, do a backup of your Gionee S6 Pro, S8 or S9 if possible.





Email post or share on social media

Comments