How to Flash Huawei P Smart

Earlier on when the Huawei P Smart was released we published a post to show our readers the features, specifications and price of this most adorable Huawei device called P Smart. As well as how you can perform a hard or soft reset when your P Smart becomes unresponsive or should you choose to give to someone else with no data in it.

Usually, the P Smart hard or soft reset is supposed to fix any possible software issue you might be experiencing with your Huawei P Smart or other similar Android devices. But if you have tried that already and it failed then, you should probably opt-in for formatting, in this case, I will show you how to use SP Flash Tool to format your P Smart.


Steps on how to flash Huawei P Smart with SP Flash Tool:

·         Download the stock ROM of Huawei P Smart.
·         As usual, you need to place your phone on charge till it is charged not less than 50 percent before you process else your phone might not wake up even after formatting.
·         Next you will have to follow the instruction of using a Smart Phone Flash Tool as explained here.

Why Stock Firmware

·         Stock Firmware flashing can be applied to Unbrick your Huawei P Smart
·         Stock ROM flashing can be applied to fix Bootloop issues.
·         Stock Firmware flashing can be applied to either upgrade or downgrade your Huawei P Smart
·         It can be applied to unroot or fix bugs on your Huawei P Smart.
·         To fix stutter or lag on your Huawei P Smart
·         Stock firmware flashing is effective in solving software issues of Huawei P Smart.
·         Stock firmware flashing can be applied to revert back to the stock of your Huawei P Smart to gain your warranty.

Tips to Remember:

i.                     This update is meant for Huawei P Smart users only.
ii.                   Be sure to try the other method of installing stock firmware if yours have unlocked Bootloader issue.
iii.                 TWRP Recovery is a good alternative to how to upgrade your device if you don’t want to do it the normal way. Here is a post on TWRP Recovery.
iv.                 THEUPSPOT is in no way responsible for any damage you might have on your Huawei P Smart while installing the update.
v.                   The usual upgrade steps require the use of PC or Laptop to carry out the firmware flashing.
vi.                 Ensure that you have an updated and working USB drivers installed.

vii.                Finally, just before you go on with the upgrade or downgrade, do a backup of your Huawei P Smart if possible. 

Comments